Scanning Hot Metal Detector

The scanning system, in association with state-of-the-art IR photocell technology, is the optimal solution for accurate, fast and reliable detection of product, whatever the size and the temperature. It works under adverse conditions such as water, steam, dust or scale. It is particularly well adapted to applications where the change of the process results in a significant variation of the temperature of the product or a variation of its emissivity factor.

Fiber Optic Hot Metal Detector

Thanks to its fiber optics the Stato-Sonde Z6H and the Rota-Sonde DC2038 are able to detect products which are not in its direct field of view (due to physical obstructions, limited space, etc.), even in areas of high ambient temperature.

Hot Metal Detector for detectiion below roll table

The IRIS Hot Metal Detector is used for the most difficult detections applications in hot strip and plate mills with descale water, lot of steam or mechanical obstruction such as: Detection before crop shear, at the edgers for precise timing of automatic width control.

Static Hot Metal Detector

The Stato-Sonde Z3 is a hot metal detector used for the detection of product with temperature over 400 °C / 750 °F.